Ministère de l'Enseignement Supérieur et de la Recherche Scientifique

Université M'hamed Bougarra de Boumerdès
Unité de Recherche Matériaux, Procédés et Environnement

Université M'hamed Bougarra de Boumerdès

Publications internationales de l'Unité de Recherche Matériaux, Procédés et Environnement (URMPE) de l’UMBB

Publications internationales 2019

  1. Souas, F., Safri, A., & Benmounah, A. (2019). Experimental investigation of the rheological behavior of Algerian crude oils from the quagmires. Petroleum Science and Technology, 37(4), 443-451. (Revue  de rang ʺAʺ)
  2. Rebai, N., Hadjadj, A., Benmounah, A., Berrouk, A. S., & Boualleg, S. M. (2019). Prediction of natural gas hydrates formation using a combination of thermodynamic and neural network modeling. Journal of Petroleum Science and Engineering, 182, 106270. (Revue  de rang ʺAʺ)
  3. Bekraoui, A., Hadjadj, A., Benmounah, A., &Oulhadj, M. (2019). Uncertainty study of fiscal orifice meter used in a gas Algerian field. Flow Measurement and Instrumentation, 66, 200-208. (Revue  de rang ʺAʺ)
  4. Lekkam, M., Benmounah, A., Kadri, E. H., Soualhi, H., & Kaci, A. (2019). Influence of saturated activated carbon on the rheological and mechanical properties of cementitious materials. Construction and Building Materials198, 411-422.(Revue  de rang ʺAʺ)
  5. Mehraz, S., Kongsong, P., Taleb, A., Dokhane, N., & Sikong, L. (2019). Large scale and facile synthesis of Sn doped TiO2 aggregates using hydrothermal synthesis. Solar Energy Materials and Solar Cells, 189, 254-262.  (Revue  de rang ʺAʺ)
  6. Chouk, R., Aguir, C., Haouanoh, D., Bergaoui, M., Tala-Ighil, R., Stathatos, E., &Khalfaoui, M. (2019). A first-principles computational and experimental investigation on schiff base cobalt complex towards designing solar cells. Journal of MolecularStructure, 1196676-684.https://www.sciencedirect.com/science/article/abs/pii/S0022286019308609 (Revue  de rang ʺAʺ)
  7. Sabrina Hemsas, Messaoudhachemi, Adsorption of methylene Blue Dye by Stipatenacissima L (Alfa fibers) in aqueous solution: Equilibrium, Thermodynamics, Kinetic Mechanismâ[Revue Roumaine de Chimie] 2019.(Revue  de rang ʺAʺ)
  8. Azibi, M., Saoula, N., &Aknouche, H. (2019). The influence of substrate bias voltage on the electrochemical properties of ZrN thin films deposited by radio-frequency magnetron sputtering: Biomedical application. Journal of Electrical Engineering70(7), 112-116. (Revue  de rang ʺAʺ)
  9. Ait-Djafer, Z. A., Saoula, N., Wamwangi, D., Madaoui, N., &Aknouche, H. (2019). Bias voltage effect on magnetron sputtered titanium aluminum nitride TiAlN thin films properties. European Physical Journal. Applied Physics86.(Revue  de rang ʺAʺ)
  10. Taleb, Samia, Dokhan, Nahed, ZazI, Nacer, et al. Perpendicular Weak Permanent Magnetic Field Effect on the Electrodeposited Nanostructured ZnO Film and its Kinetic Corrosion Behavior. Protection of Metals and Physical Chemistry of Surfaces, 2019, vol. 55, no 4, p. 781-788.(Revue  de rang ʺAʺ)
  11. Kerkar, F., Kheloufi, A., Dokhan, N., Ouadjaout, D.,Belhousse, S., Medjahed, S., &Laib, K. (2019). Oxygen and Carbon Distribution in 80Kg Multicrystalline Silicon Ingot. Silicon, 1-6.(Revue  de rang ʺAʺ
  12. Boutiba, Aldjia, Chaid, Rabah, et MOLEZ, Laurent.Characterisation and microstructure of high-performance concretes reinforced with metal fibres ripened in seawater. European Journal of Environmental and Civil Engineering, 2019, vol. 23, no 9, p. 1083-1093.(Revue  de rang ʺAʺ)
  13. Bensouilah, A., Guittoum, A., Hemmous, M., Martínez-Blanco, D., Gorria, P., &    Blanco, J. A. (2019).. Low Temperature and Surfactant-Free Hydrothermal Synthesis of CoNi Nanoparticles: Structure, Microstructure, and Magnetic Properties. Journal of Superconductivity and NovelMagnetism, 2019, vol. 32, no 9, p. 2939-2945. (Revue de rang ʺAʺ)
  14. Boukherroub, N., Hemmous, M., Guittoum, A., Martínez-Blanco, D., Souami, N., Gorria, P., & Blanco, J. A. (2019). Structure, Microsctructure and Magnetic Properties of Ternary (Fe0. 6Al0. 4) 100-xSix Nanostructured Powders: Effect of Si Addition. In Journal of Nano Research (Vol.58, pp.102-117). Trans Tech Publications Ltd. (Revue de rang ʺAʺ)
  15. AitMedjber, F., Saidi, M., Safi, B., &Mechakra, H. (2019). Evaluareaeficienţeinisipului dune caadăugaremineralăpentru a producebetonfibră ultra-performante. Revista Romana de InginerieCivila, 10(1), 34-50. (Revue de rang ʺBʺ)
  16. Basaid, D., Benmounah, A., &Aribi, C. (2019). Experimental study of environmentally Friendly composite materials Behavior in aeronautical applications. Algerian Journal of Environmental Science and Technology, 5(1). (Revue de rang ʺBʺ)
  17. Basaid, Djamel, Benmounah, Abdelbaki, &Aribi, Chouaib,AbdelghaniMay,Etude expérimentale de la réparation des structures d'aéronefs par collage des patchs à base d'époxy et fibre de verre,Journal of Materials and Engineering structures (2019)409-426,(Revue de rang ʺBʺ)
  18. Sara Allalou, RabiaKheribet, Abdelbaki Benmounah, Effects of calcined halloysitenano-clay on the mechanical properties and microstructure of low-clinker cement mortar, Case Studies in Construction Materials, Vol10, p 10, e00213,https://doi.org /10.1016/j.cscm.2018.e00213,  (Revue de rang ʺBʺ)
  19. Saoudi, N., &Bezzazi, B. (2019). Flexural fatigue failure of concrete reinforced with smooth and mixing hooked-end steel fibers. Cogent Engineering6(1), 1594508.
  20. Mehena Oualit& Raoul Jauberthie, Corrosion of concrete pipes in a sewer environment – two case studies;2019, Water and Environment Journal, 2019.
  21. Mehena Oualit, Yannick Melinge, Raoul Jauberthie et M. Tahar Abadlia, Durabilité des bétons des réseaux d’assainissement urbain,2019 ;Materials& Techniques - Journal of industrialmaterials, theirimplementation techniques and use
  22. OUALIT, Mehena, JAUBERTHIE, Raoul, et ABADLIA, M. Tahar. Concrete pathologies in sewer structures: microstructural analysis. Journal of Building Pathology and Rehabilitation, vol. 4, no 1, p. 12.(2019).
  23. Haider, S., Messaoud-Boureghda, M. Z., Aknouche, H., Akkouche, A., Hammadi, L., & Safi, B. (2019).An ecological water-based drilling mud (WBM) with low cost: substitution of polymers by wood wastes. Journal of Petroleum Exploration and Production Technology, 9(1), 307-313. (Revue de rang ʺBʺ)
  24. SEBKI, Ghania, SAFI, Brahim, et CHAHOUR, Kahina. Recycling of Foundry Sand Wastes in Self-Compacting Mortars: Use as Cementitious Materials and Fine Aggregates. Journal of Applied Engineering Sciences, 2019, vol. 9, no 2, p. 195-200.
  25. Haouanoh, D., TalaIghil, R. Z., Toubane, M., Bensouici, F., &Mokeddem, K. (2019). Effects of thermal treatment and layers’ number on SnO2 thin films properties prepared by sol-gel technique. Materials Research Express, 6(8), 086422. https://iopscience.iop.org /article/10.1088/2053-1591/ab1d96 (Revue de rang ʺBʺ)
  26. Kerrami, A., Mahtout, L., Bensouici, F., Bououdina, M., Rabhi, S., Sakher, E., &Belkacemi, H. (2019).Synergistic effect of Rutile-Anatase Fe-doped TiO2 as efficient nanocatalyst for the degradation of Azucryl Red. Materials Research Express, 6(8),0850f5.https://iopscience.iop.org / article/10.1088/2053-1591/ab2677 (Revue de rang ʺBʺ)
  27. Boukerche, S., Himour, A., Bououdina, M., Bensouici, F., &Ouchenane, S. (2019).Multilayered ZnO/TiO2 nanostructures as efficient corrosion protection for stainless steel 304. Materials Research Express, 6(5), 055052.https://iopscience.iop.org article/10.1088/2053-1591/ab042f https://iopscience.iop.org article/10.1088/2053-1591/ab042f(Revue de rang ʺBʺ)
  28. Tala-Ighil, RazikaZair. Graphene: An Out Standing Material. Journal of Solar Energy Research Updates, 2019, vol. 6, p. 64-68.(Revue de rang ʺBʺ)
  29. Benbrahim, Z., Benotmane, B., Zerizer, A., Denaud, L., &Marchal, R. (2019). Experimental study of the effect of soaking temperature on the peeling parameters of two oak species (QuercuscanariensisWilld. and QuercusafaresPomel). Wood Material Science & Engineering, 1-9. (Revue de rang ʺBʺ)
  30. Guenane, F., Kerchich, Y., &Hachemi, M. (2019). Heavy metals in flue gas emission and ash generated by an incineration plant for hospital and industrial waste in Northern of Algeria. Algerian Journal of Environmental Science and Technology.
  31. Bouallouche, R., Kebir, M., Nasrallah, N., Hachemi, M., Amrane, A., &Trari, M. Enhancement of photocatalytic reduction of Cr (VI) using the hetero-system NiAl2O4/ZnO under visible light. Algerian Journal of Environmental Science and Technology, 5(3). (2019).
  32. AZIBI, M., SAOULA, N., & BENAMAR, A. First-principles calculations of the phase stability and surface energy of tio2 (100) and (110). Chemtech’15, 221.
  33. Zegtouf, H., Saoula, N., Azibi, M., Bait, L., Madaoui, N., Khelladi, M. R., &Kechouane, M. (2019).A study of properties of ZrO2 thin films deposited by magnetron sputtering under different plasma parameters: Biomedical application. Journal of Electrical Engineering70(7), 117-121.
  34. Benouadah, Nacera, Aliouche, Djamel, Pranovich, Andrey, et al. Chemical characterization of Pinushalepensis sapwood and heartwood. Wood Material Science & Engineering, 2019, vol. 14, no 3, p. 157-164.(Revue de rang ʺBʺ)
  35. Djanette BLIZAK, Messaoud Hamiane ;Exploring the role of a training program about the use of ict on personal 64 sense of efficacy and intrinsic motivation of newly recruited teachers at he university,INTE-ISTEC-ITICAM 2019, Prague, Czech Republic P.64.(Revue de rang ʺBʺ)
  36. Ghernouti, Y., Safi, B., etRabehi, B. Effect of Natural Pozzolan and Calcined Paper Sludge as Pozzolanic Additions on the Physicals and Mechanicals Properties of Heat Treated Self-Compacting Mortars. Journal of Building Materials and Structures, 2019, vol. 6, no 1, p. 39-49.(Revue de rang ʺCʺ)
  37. Bezoui, M., Moulaï, M., Bounceur, A., & Euler, R. (2019).An iterative method for solving a bi-objective constrained portfolio optimization problem. Computational Optimization and Applications, 72(2), 479-498.
  38. Bounceur, A., Bezoui, M., Hammoudeh, M., Lagadec, L., & Euler, R. (2019).Finding the polygon hull of a network without conditions on the starting vertex. Transactions on Emerging Telecommunications Technologies, e3696.
  39. Rokbi Mansour, BaaliBrahim, Rahmouni Z. andLatelli H.«Mechanical properties of polymer concrete made with jute fabric and waste marble powder at various woven orientations. ». International Journal of Environmental Science and Technology; 2019. (Revue de rang ʺBʺ)
  40. Rokbi, M., Rahmoun, Z.E.A. and Baali, B.Flexural Characterization Of Polymer Concrete Comprising Waste Marble And Date Palm Fibers; Technical Sciences, p. 14.2019.(Revue de rang ʺBʺ)
  41. Mezidi, A., Guerri, O., Boudia, S. M., &Mohammedi, K. (2020). Influence of wind data temporal variation in wind resource assessment. two case studies in the southern part of Algeria. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 42(2), 161-175.
  42. Messaoud-Boureghda, M. Z., &Fadila, D. (2019). Adsorption of heavy metals (cadmium, chrome and copper) on grafted cellulose: Establishment of kinetic models. Proceedings of the International Academy of Ecology and Environmental Sciences9(2), 53-72.
©2021 URMP. All Rights Reserved.

Search